BFPNV - TRACER TECH P149 INSPECTION PENETRANT

  • MSDS: BFPNV
  • Manufacturer: URESCO ARDROX
  • Product Name: TRACER TECH P149 INSPECTION PENETRANT
  • National Stock Number: 6850-00-782-2740
Product Identification

Product ID:TRACER TECH P149 INSPECTION PENETRANT
MSDS Date:01/01/1987
FSC:6850
NIIN:00-782-2740
Kit Part:Y
MSDS Number: BFPNV

Responsible Party
URESCO ARDROX
16961 KNOTT AVE
LA MIRADA, CA 90638-6015
US

Cage: EO423

Contractor
URESCO ARDROX
LA MIRADA, CA 90638-6015 US

Telephone: 714-739-2821

Cage: EO423

Ingredients

AROMATIC HYDROCARBONS

Fraction By Weight: 78%


FLUORANTHENE (SARA III)

CAS: 206-44-0

RTECS: LL4025000

Fraction By Weight: 4.5%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


ISOBUTANE/PROPANE MIXTURE


CHLORODIFLUOROMETHANE

CAS: 75-45-6

RTECS: PA6390000

OSHA PEL 1000 PPM

ACGIH TLV: 1000PPM; 9192


DIMETHYL ETHER

CAS: 115-10-6

RTECS: PM4780000

Hazards

Effects of Overexposure:NO INFORMATION GIVEN BY MFG.

First Aid

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
W/SOAP & WATER. RMV CONTAM CLTHG & SHOES. INGEST:DO NOT INDUCE
VOMIT. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATTN.

Fire Fighting

Flash Point:N/R (AEROSOL)
Extinguishing Media:CO*2, DRY CHEM POWDER, FOAM
Fire Fighting Procedures:COOL AEROSOL CANS W/WATER SPRAY
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST WHEN EXPOSED TO
TEMP ABOVE 130F

Accidental Release

Spill Release Procedures:ABSORB SPILL W/NON-COMBUST ABSORB
(SAND,SOIL,ETC.) FLUSH RESIDUE W/SOAP & WATER. VENTILATE AREA.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA AWAY FROM SOURCES OF HEAT AND IGNITION. KEEP UPRIGHT. DO NOT
INHALE VAPORS. WASH THOROUGHLY AFTER USE.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:MECHANICAL
Protective Gloves:NONE
Eye Protection:OPTIONAL
Supplemental Safety and Health
INSPECTION PENETRANT KIT CONTAINS 3 CANS EACH OF PENETRANT, REMOVER AND
DEVELOPER. SEE APPLICABLE MSDS FOR EACH PART. MSDS DATED APRIL 83.
MFG RPT FP -18F PMCC

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:444F,229C
Spec Gravity:0.95
Evaporation Rate & Reference:N/R (AEROSOL)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW-GREEN LIQUID - MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Hazardous Decomposition Products:CARBON DIOXIDE

Disposal

Waste Disposal Methods:AEROSOL CANS MUST BE CAREFULLY EMPTIED PRIOR TO
DISPOSAL. DO NOT INCINERATE. EMPTY CANS/REMOVED CONTENTS MUST BE
DISPOSED OF I/A/W ALL FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.